Posted by LadulceLavie
A few years ago while in high school I learnt about antiquing, now when I look at this table that has been in the storage room for some time and I need to use it again but the is not budget I thought back to that. This technique is very simple and it gives furniture a character and best of all it can be used on just about anything from frames to tables and cupboards
The trick thought is making the worn effect realistic. To know where exactly to apply the worn effect, except for the edges try handles and areas that are handled regularly and to know what the history of your article is. That is has it been painted over and over before or has is just been painted once.
If your history is continuous painting you will need two different paints it preferred that the top coat be brighter than the top to get the full effect of the distressing and for the painted once effect you will need just one paint and the effect will reveal the bare wood below.
To preserve the genuineness of your colour choice for long, you will need to paint clear polyurethane over the finished project. A water-based polyurethane that won’t yellow over time and is therefore my best choice.
You will need to clean and sand down your chosen furniture before you start painting on it.
Paint the whole piece in the base coat colour you’ve selected then for the bare-wood look: When the base coat is dry, start sanding off areas that would naturally end up distressed do not get carried away with the sanding and sand too much of the paint off then wipe the furniture piece with a cloth.
Paint the whole piece in the base coat colour you’ve selected, for the two colour look: Rub candle wax on the areas where you’d like to see colour show through. Don’t forget to do the sides and back; you want the entire piece to be finished. Then apply the top coat over the base coat and the wax, cover the entire furniture piece well. After the paint dries, rub the steel wool over the areas you’ve waxed, if you dip it in hot water it will be quicker and easier then wipe off the piece with the cloth.
Apply a finish if desired