Monthly Archives: April 2012
Rubbing a walnut over scratches on your furniture will camouflage knocks and scrapes in them, polish as normal. For the darker furniture a solution of instant coffee will do the trick let it stain, polish as normal
This technique is similar to the one mentioned in the previous post,https://ladulcelavie.wordpress.com/2012/02/17/improve-the-look-of-your-vases/ ,https://ladulcelavie.wordpress.com/2012/04/16/give-your-furniture-an-antiqued-or-distressed-look/and https://ladulcelavie.wordpress.com/2012/01/27/collage-table/.I have used it on trays and table tops to plates and bowls. The beauty of it is that you can add pictures to it.
Step 1: Apply the Base Coat
Crackling occurs naturally when the wood beneath an old, brittle finish expands and contracts because of fluctuations in temperature and humidity. Begin by applying a base coat of acrylic paint to an unfinished piece. Let dry. This stage is where you will add your pictures before you apply the base coat; you will use modge podge or glue to stick the picture on the furniture piece. Please remember that your pictures need to be transferred on to an 80gsm paper or less.
Step 2: Apply the Crackle Medium
Apply crackle medium over the base coat with a brush. To create small cracks, use a thin coat. For larger cracks, apply a thicker coat and remember when you buy this to specify which size cracks you want as you get variable size cracks.
Step 3: Apply the Top Coat
After the crackle medium dries, paint over it with a top coat of different colour paint, using long, sweeping strokes. The process works best if the top coat is applied 2 to 4 hours after applying the crackle medium. When applying the top coat, avoid overlapping or re-stroking.
There are also filler paints available that will fill the cracks with a colour of your choice, like gold and brown depending on the item I’m cracking of course. To apply this put a small amount on a cloth and wipe gently over the piece, working in minor portions.
Step 4: Darken the Hardware
Hardware is often overlooked in the process of giving a reproduction an antique look. To darken shiny new brass or bronze hardware, brush on a commercial antiquing solution. As it dries, the chemical solution will darken the metal. Once the metal has darkened, use a pad of extra-fine steel wool to distress any areas.
Step 5: Seal the furniture.
After the crackle medium dries you will need to seal the cracks with a sealant that is not water based to prevent the cracks from dissolving when they come in contact with water.
A few years ago while in high school I learnt about antiquing, now when I look at this table that has been in the storage room for some time and I need to use it again but the is not budget I thought back to that. This technique is very simple and it gives furniture a character and best of all it can be used on just about anything from frames to tables and cupboards
The trick thought is making the worn effect realistic. To know where exactly to apply the worn effect, except for the edges try handles and areas that are handled regularly and to know what the history of your article is. That is has it been painted over and over before or has is just been painted once.
If your history is continuous painting you will need two different paints it preferred that the top coat be brighter than the top to get the full effect of the distressing and for the painted once effect you will need just one paint and the effect will reveal the bare wood below.
To preserve the genuineness of your colour choice for long, you will need to paint clear polyurethane over the finished project. A water-based polyurethane that won’t yellow over time and is therefore my best choice.
You will need to clean and sand down your chosen furniture before you start painting on it.
Paint the whole piece in the base coat colour you’ve selected then for the bare-wood look: When the base coat is dry, start sanding off areas that would naturally end up distressed do not get carried away with the sanding and sand too much of the paint off then wipe the furniture piece with a cloth.
Paint the whole piece in the base coat colour you’ve selected, for the two colour look: Rub candle wax on the areas where you’d like to see colour show through. Don’t forget to do the sides and back; you want the entire piece to be finished. Then apply the top coat over the base coat and the wax, cover the entire furniture piece well. After the paint dries, rub the steel wool over the areas you’ve waxed, if you dip it in hot water it will be quicker and easier then wipe off the piece with the cloth.
Apply a finish if desired